The bracket is powder coated and suits all sizes of Safety Anchors.
Do I need them?
All of our Mobile cross country fences are designed with a low centre of gravity keeping stability in mind. However we recommend that Anchors are used with all Mobile fences.
The Pony Club & British Eventing insist that all mobile fences need to be secured both for competition and training this is most commonly done with an Anchor. Insurance companies for Livery Yards and Equestrian centres will also expect mobiles to anchored as part of your Health and Safety policy.
The rubber cover is completely optional but does add an additional element of safety.
Construction & Guarantee
Unlike spirafix the main body of the Safety anchors we use is from 1 piece of steel, this means the part receiving the hammer blows and the thread are one single piece, they are not joined afterwards, therefore the chance of the head breaking off is practically zero and we even offer a 5 year guarantee against it.
How do I use them?
To install: (left) Screw the bracket onto the mobile cross country fence. Using a hammer, drive the anchor into the ground through the bracket hole.
To remove: (right) Unscrew anchor from the ground, using an adjustable spanner or 19mm spanner. The ground will be undisturbed, with no holes to fill. The brackets can be left fitted for next time.
This depends partly on the style of jump, as a general rule single piece fences with a reasonable base width can be fitted with two anchors at the side towards the front.
Those of a lighter construction, such as Tiger trap or with a higher centre of gravity such as the Viaduct may require two anchors at the side towards the front and another one or two towards the back.
With fences that are going to be jumped from each side you require 2 anchors on each side, four in total.
With the XC system we recommend 3 anchors fitted to each pillar or supporting fence.
My Cross country fence is in two sections?
We recommend that all Cross country fenecs are single section, if this is not possible you need to bolt both sections together effectively making the jump one single piece, then secure with two anchors at the side towards the front and if required another two towards the back.
If in any doubt as to how to anchor a fence, take advice from an experienced course builder or British Eventing technical advisor.
Which Length do I need?
|Choose your option||460mm Safety Anchor|